- New
B543 2RS MAX | Headset Bearing
£14.99
USED ON CANNONDALE HEADSHOK & LEFTY Inner x Outer x Depth (mm): 39.7 x 50.8 x 7.14
Note, if you here looking at this bearing as the Cannondale MTB you have has a non Cannondale fork (such as Fox/Rockshox etc) then you need a lower bearing with a chamfer on the ID (to fit a normal compression headset system) - we do not stock this - not available as a separate bearing.
Inch Dia: 1-1/2"
Angle / Chamfer: Non
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
- Inner x Outer x Depth (mm): 39.7 x 50.8 x 7.14
- Inch Dia: 1-1/2"
- Angle / Chamfer: Non
- Used On: Cannondale Headshok & Lefty
- Alternative Part Ref: 397508 2RS MAX
- Bearing ID: 39.7 mm
- Bearing OD: 50.8 mm
- Bearing Thickness: 7.14 mm
- Internal Angle: N/A
- External Angle: N/A
- Material: Chromium Steel GCR15 (Race & Balls)
- Grease: SINOPEC HTHS Bearing Grease, 30% filled
- Seal: Double-sealed 2RS
- No Cage - Maximum Complement of Bearings within race for extra load capacity and durability
16 other products in the same category:
USED ON CANNONDALE HEADSHOK & LEFTY Inner x Outer x Depth (mm): 39.7 x 50.8 x 7.14
Note, if you here looking at this bearing as the Cannondale MTB you have has a non Cannondale fork (such as Fox/Rockshox etc) then you need a lower bearing with a chamfer on the ID (to fit a normal compression headset system) - we do not stock this - not available as a separate bearing.
Inch Dia: 1-1/2"
Angle / Chamfer: Non